- About
-
I am an Associate Professor of mechanical engineering in Matter & Materials Deparment of the College of Science, Technology & Engineering at James Cook University in Townsville, Australia. I received my B.Sc., M.Sc., and Ph.D. degrees in mechanical engineering from Huazhong University of Science & Technology in Wuhan, China. Subsequently, I started my academic and industrial R&D career at universities and government laboratories in five countries on three continents, including Tianjin University in Tianjin, China; Kumamoto University in Kumamoto, Japan; Kansas State University in Manhattan, Kansas, USA; the Australian National University in Canberra, Australia; the National Institute of Standards & Technology in Gaithersburg, Maryland, USA; and Singapore Institute of Manufacturing Technology in Singapore.
My research focuses on multiscale structure-property-process relations of a wide spectrum of engineering, dental and biological hard tissue materials. These materials have applications in optics, semiconductors, mechanical structures, dental restorations, osteoporosis/osteoarthritis studies, and marine/animal sciences. Much of my research involves collaborations with scholars or practitioners in dentistry, anatomy, orthopedic surgery, tribology, and zoology. I have published over 100 publications including some 80 refereed journal papers and 7 book chapters, and produced 2 patents and a dozen industrial project reports. I am a senior member of the North American Manufacturing Research Institution of the Society of Manufacturing Engineers (NAMRI/SME); a member of the American Society of Mechanical Engineers (ASME), the Optical Society of America (OSA), the American Ceramic Society (Acers), ASM International (ASM), and the Society of Photo-Optical Instrumentation Engineers (SPIE).
- Publications
-
These are the most recent publications associated with this author. To see a detailed profile of all publications stored at JCU, visit ResearchOnline@JCU. Hover over Altmetrics badges to see social impact.
- Journal Articles
-
- Niroshan N, Yin L, Sivakugan N and Veenstra R (2018) Relevance of SEM to long-term mechanical properties of cemented paste backfill. Geotechnical and Geological Engineering, 36 (4). pp. 2171-2187
- Song X, Yang J, Ren H, Lin B, Nakanishi Y and Yin L (2018) Ultrasonic assisted high rotational speed diamond machining of dental glass ceramics. International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 387-399
- Springall G and Yin L (2018) Nano-scale mechanical behavior of pre-crystallized CAD/CAM zirconia-reinforced lithium silicate glass ceramic. Journal of the Mechanical Behavior of Biomedical Materials, 82. pp. 35-44
- Yin L, Baba T and Nakanishi Y (2018) Fracture-free surfaces of CAD/CAM lithium metasilicate glass-ceramic using micro-slurry jet erosion. Journal of the Mechanical Behavior of Biomedical Materials, 80. pp. 59-67
- Alao A, Stoll R, Song X, Abbott J, Zhang Y, Abduo J and Yin L (2017) Fracture, roughness and phase transformation in CAD/CAM milling and subsequent surface treatments of lithium metasilicate/disilicate glass-ceramics. Journal of the Mechanical Behavior of Biomedical Materials, 74. pp. 251-260
- Alao A, Stoll R, Song X, Miyazaki T, Hotta Y, Shibata Y and Yin L (2017) Surface quality of yttria-stabilized tetragonal zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 102-116
- Elbourne-Binns L, Baena J, Yin L and Peng Z (2017) Lubricated wear of machinable lithium disilicate glass ceramic. Key Engineering Materials, 739. pp. 18-22
- Yin L, Nakanishi Y, Alao A, Song X, Abduo J and Zhang Y (2017) A review of engineered zirconia surfaces in biomedical applications. Procedia CIRP, 65. pp. 284-290
- Alao A and Yin L (2016) Assessment of elasticity, plasticity and resistance to machining-induced damage of porous pre-sintered zirconia using nanoindentation techniques. Journal of Materials Science and Technology, 32 (5). pp. 402-410
- Peng Z, Rahman M, Zhang Y and Yin L (2016) Wear behavior of pressable lithium disilicate glass ceramic. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 104 (5). pp. 968-978
- Song X, Ren H and Yin L (2016) Machinability of lithium disilicate glass ceramic in in vitro dental diamond bur adjusting process. Journal of The Mechanical Behavior of Biomedical Materials, 53. pp. 78-92
- Conference Papers
-
- Yin L, Alao A, Song X and Stoll R (2016) Manufacturing reliable ceramic crowns: the role of abrasive machining in digital dentistry. Proceedings of the 11th International Manufacturing Science and Engineering Conference. In: ASME 2016: 11th International Manufacturing Science and Engineering Conference, 27 June - 1 July 2016, Tianjin, China
- More
-
ResearchOnline@JCU stores 56+ research outputs authored by A/Prof Ling Yin from 2007 onwards.
Connect with me
Similar to me
-
Prof Yinghe HeEngineering
-
A/Prof Rabin TuladharEngineering
-
Prof Robert RobsonPhysical Sciences
-
A/Prof Matthew TanCollege of Science & Engineering
-
Dr Margaret JordanBiomedical Sciences and Molecular Biology